Trampoline T-Top Accessories:

Custom Made “Telephone Booth” style enclosure

•Enclosures and Custom Canvas Work can take a long time to get, and are often expensive. Atlantic Towers thru an arrangement with a manufacturer of OEM canvas products makes it possible to order a “Telephone Booth” style enclosure easily. Just provide the measurement of your forward Trampoline T-top legs as installed on your boat. (see measurement diagram)

No installation is required, the Trampoline T-top enclosure secures directly to your T-top frame with wide Velcro collars. No drilling or fasteners are required. And your enclosure can easily be installed and removed. When not in use, it can rolled up an stowed.

Available in Black, White, Green and Blue to match your T-top $399 including shipping

Call us to order, allow 2-4 weeks for delivery. Note: Enclosure fits ONLY Atlantic Towers Trampoline and Super Trampoline T-tops with leg style TTS5152 and TTS7172.

Part #         Description                             Price (includes shipping)
ENC56        Custom Enclosure Black         $399
ENC57        Custom Enclosure White        $399
ENC58        Custom Enclosure Green        $399
ENC59        Custom Enclosure Blue          $399

Halogen Deck Flood Lamps

•Deck Flood Lamps are the single most popular option on our Arches. This unit from BEP (the New Zealand manufacturer of high end lighting for recreational and commercial marine applications) provides plenty of illumination for night fishing and other activities. 55 watt halogen bulb in high efficiency reflector concentrates the light where you need it. Sold in pairs (our part # MP150) with an installation kit (our part # KIT53) that allows mounting to Atlantic Towers Fishing Arches and Radar Arches without drilling. Allows full movement of light head for aiming. Each light draws approximately 5 amps, and a pair should be connected to a 15 amp fuse or breaker (wiring is not included)

Sold in Pairs with mounting Kit $129.00 our part #MP150, KIT53

Anchor Running Light

Regulations call for your anchor light to be above the highest permanent structure on your boat. So if you’re going to be “on the hook” after dark, you should plan to move the anchor light to your T-top. We make two lights on custom anodized aluminum masts which can be mounted directly to the outer ring of your Trampoline T-top. The lights are installed with four 1/4” screws, and can be “turned upside down” to allow a winter cover or shrink wrap to go directly over your Trampoline T-top. Available in two heights, choose the approximately 5” high MA222A if overall height is an issue either on the water, or on the trailer. Choose the approximately 18” high MA220A if you are installing a radar antenna, as the light will need to be above it. If your boat is 26’+ and you need to show stern or forward steaming light when running the two way light head allows the two lamps to be wired independently.

Approx 5” mast Anchor/Running Light $139.00 our part # MA222A
Approx 18” mast Anchor/Running Light $139.00 our part # MA220A

Antenna Bracket Option

Antenna Bracket threaded 1”-14 for mounting VHF, GPS and other antennas. Clamps to perimeter of “Trampoline” t-top (or any other structure made from 1 1/2” schd 40 pipe measuring 1.90” o.d.) for fast installation. Made be rotated down by loosening 4 allen screws in the clamp. Part # KIT22.1 $89

Flat Plate Mounting Kit

Flat Plate Mounting Kit provides a 3” x 5 1/2” flat surface anywhere on the Trampoline T-top perimeter ring. This may be used to mount antenna brackets, running lights and other gear on the t-top which requires a flat surface. Part # KIT22.2 $89

•Adjust-O-Launcher" Rod Holder

The Atlantic Towers unique patented Adjust-O-Launcher Rod Holder allows an additional rod holder to be placed anywhere on your Arch. The Clamp assembly is anodized to the same hardness as your arch, and may be installed and removed without marring the finish of your Arch. You can try as many positions as you wish. Available in Gold to match our optional weld on rod holders, or clear natural aluminum.

To change the position of the rod holder to any one of 12 settings, simply loosen the internal allan screw, set the rod holder to the new position and clamp back onto the Arch

Available Individually for $99 each, or if you order four or more $89 each
Adjust-O-Launcher in Gold, part # AJ305G (includes clamp for 1 1/2” pipe)
Adjust-O-Launcher in Clear, part # AJ305C (includes clamp for 1 1/2” pipe)
Adjust-O-Launcher are also available with clamps in other pipe sizes to fit nearly all Towers, T-tops and Arches.

Pair of Starboard™ Mounting Bars Option

Mounting Bars are machined from “Starboard” a plastic polymer that is strong, but smooth. They slip between the “Trampoline” T-top’s aluminum frame and the fabric “Trampoline”. They are countersunk on top to allow thru bolting to the aluminum frame. The Mounting Bars allow installation of equipment such as radar or antennas by bolting thru top fabric into mounting bars. Also used to support overhead electronics consoles (see package deals below) , if correctly spaced, one pair of bars can perform both functions. It is necessary to drill the “Trampoline” T-top frame for installation.

Electronics Box

MP271

Locking water tight Electronics Box with smoked plexiglass door mounts overhead in the Trampoline T-top (KIT# 21 mounting bars required for installation) Choose full size 32” box, or 24” Compact Box.



Dimensions:

Outside: 32" W x 16 1/2" D x 11 1/4" H
Inside: 31 1/2" W x 15 3/4" D x 11" H
Front Panel: 29" W x 8 3/4" H

32” Box including mounting bars and all required installation hardware
$499 our Part # MP271, with KIT#21, and KIT#21.4

MP270

Dimensions:

Outside: 24" W x 14" D x 10" H
Inside: 23 1/4" W x 13" D x 9 3/4" H
Front Panel: 20 1/2" W x 6 1/4" H

24” Box including mounting bars and all required installation hardware $479
our Part # MP270, with KIT#21, and KIT#21.4

Please be aware that as the weight of equipment mounted in the Trampoline T-top increases, it may be necessary to add additional bracing to the T-top. See the list of installation accessories.

Direct Mount T-top Riggers Bases

New Direct Mount T-top Riggers Bases from Tigress. No Welding Required. Clamps Directly to Perimeter Ring of Atlantic Towers Trampoline T-top, only a single 1/4” hole required. These Riggers are adaptable to any Atlantic Towers Trampoline T-top configuration. Spring loaded “T” handle allows easy deployment of riggers from the running to fishing postion. Bases accept 1 1/2” telescoping pole

Pair of Bases for 1 1/2” telescoping poles
Our Part # MP967
$459.00

Easily Deployable Tigress 15’ telescoping poles for above
Pair of 15’ telescoping poles, Black Pole, Gold Fittings
Our Part# MP904
$459.00

Pair of 15’ telescoping poles, Clear Pole, Black Fittings
Our Part# MP905
$459.00

Save $19.00 on complete set, including rigging kit and FREE stow and carry bag. Trampoline T-top Rigger bases with poles $899.00. Please be aware that as the weight of equipment mounted in the Trampoline T-top increases, it may be necessary to add additional bracing to the T-top. See the list of installation accessories.

Standard Stand Off Kit #13

Additional Pair of Stand Offs for securing Trampoline T-top Legs to Console Kit #13. In some installations, particularly where the stand offs must be mounted on the forward or rear legs instead of the cross bar, in order to achieve maximum stability of the T-top structure it may be necessary to add a second pair of standoffs between the T-top legs and the console. Our Part # Kit 13 $59.00

Xtra Long Stand Off Kit #13.1

Some unusually shaped consoles, consoles that are unusually low, or where the Trampoline T-top legs cannot be positioned close to the console, may require a longer stand off than the 4" one supplied. This extra long stand off provides 8" of length and it may be installed at an angle as in these photos. Our Part # KIT 13.1 $89.00

Diagonal Brace Option

A few center console boats may provide limited areas to install the standard side brace, or if you have mounted a great deal of heavy equipment on your Trampoline T-Top, such as electronics enclosures, radar, etc, you may want the added stability and support of diagonal sway braces. Fully adjustable and may be secured either on top of the console or on it's forward face.

Replacement Fabric Tops

Replacement fabric tops for your Trampoline and Super Trampoline T-Tops in genuine Sunbrella by Glen Raven Mills includes lacing line.