Patented Adust-O-Launcher Rod Holders and Rocket Launcher Arrays
Adjust-O-Launcher Rod Holders provide a fast and easy way to add more rod holders to any aluminum tower structure. Ajust-O-Launchers feature a fully tapered aluminum rod holder with welded butt pin and full liner, welded to a patented precision machined clamp assembly that allows the rod holder to be indexed into 12 positions. You can clamp this rod holder on ANY tower, and adjust it to ANY position. Marine Grade anodized finishes are available in Gold or Clear natural aluminum.
Individual Adjust-O-Launchers are available with mounting clamps in the three most popular “schedule” aluminum pipe sizes. (Adjust-O-Launchers will not fit correctly on stainless steel tubing)
How do I determine the correct size mounting clamp for my boat?
Most Factory supplied and aftermarket Towers, Arches and Hardtops are made
from aluminum pipe. While it is somewhat confusing aluminum pipe is available
with several wall thicknesses. This wall thickness is described by the "schedule",
as in schedule 10, schedule 40 and so on. Even though the “schedule” vary
the outside diameter of the aluminum pipe will always remain the same. The
size difference between schedule pipe diameters is ¼" of an inch or greater,
so you can easily estimate the diameter of the pipe on your tower structure
with an ordinary tape or ruler.
If the outside diameter of your pipe measures approximately:
1 7/8” inches, order the 1 1/2” pipe size Adjust-O-Launcher
1 5/8” inches, order the 1 1/4” pipe size Adjust-O-Launcher
1 1/4” inches, order the 1” pipe size Adjust-O-Launcher
For ALL Atlantic Towers “Tower in a Box” structures order the 1 1/2” pipe
size Adjust-O-Launcher.
Adjusto Launcher Rod Holder Array
For mounting Adjust-O-Launcher Rod Holders on a hardtop, or under a flybridge bridge overhang, we offer an Adjust-O-Launcher Array. A curved mounting bar of 1 1/2” aluminum pipe (measures 1.90” o.d.) with a pair of heavy duty mounting brackets that swivel to accommodate any camber hardtop or deck. The standard Adjust-O-Launcher Array is 50” overall, and includes two mounting brackets, complete with bolts and backing washers, plus 5 Adjust-O-Launcher Rod Holders in your choice of clear or gold.
The Adjust-O-Launcher Array can also be custom made to any overall length, and fitted with any number of Adjust-O-Launcher Rod Holders.
click photos to enlarge
Adjusto Launcher Rod Holders Pricing
| each | 4 or more (ea) | ||
| AJ305C | 1 1/2" pipe size Clear | $99.00 | $89.00 |
| AJ305G | 1 1/2" pipe size Gold | $99.00 | $89.00 |
| AJ315C | 1 1/4" pipe size Clear | $99.00 | $89.00 |
| AJ315G | 1 1/4" pipe size Gold | $99.00 | $89.00 |
| AJ325C | 1" pipe size Clear | $99.00 | $89.00 |
| AJ325G | 1" pipe size Gold | $99.00 | $89.00 |
| Kit #AJ5 | Adjust-O-Launcher 5 Rod Holder Array | $699.00 | |
