If
you have been looking for a solid, watertight enclosure that
looks great and is priced right, you've found it. Owners of smaller
walk-around style boats have found Atlantic's popular Custom
Fishing HardTop to be the ideal solution. A
full 4 Rod Rocket Launcher is standard, along with mounts for
Halogen Spreader Cockpit Floodlights, a variety of antennas and
Radar.
Each Tower
is also as stylish as it is durable. To ensure design continuity,
each Custom Fishing HardTop is custom
fabricated to match the existing lines of your boat's windshield.
Atlantic's
Hardtops are shipped complete with all the components and guidelines
needed for easy "bolt-on" installation. No welding
is required' eliminating the possibility of damaging your boat's
finish. The best part is, there is no need to leave your boat
at some strange facility for days or even weeks, while your pipe
work is being completed.
Standard
Features
One piece all-welded
top frame of Atlantic's proprietary ATL6 aluminum extrusion
and supporting legs of schedule 40 aluminum measuring nearly
2" O.D. finished in 320 spiral texture and bright dip anodized.
High quality hand laid fiberglass top . 360 degree overhanging
edge for weather protection, with provision for canvas track
installation . Two side mount antenna plates and two halogen
light mounts aft . Overhead hand rail running port to starboard
just aft of helm seat -Rectangular carlins (roof beams) for added
strength and to allow installation of reel hangers, rod racks
and other equipment . Custom aluminum fittings for attachment
of supporting legs to boat . Stainless steel hardware . Aluminum
backup plates.
Atlantic's
Custom Fishing Hardtop is specifically designed for retrofitting
to walk around and express style boats. With it's unique
cantilevered design, the Custom Fishing Hardtop requires no forward
supports in it's normal configuration. Nothing to obstruct
your field of view from the helm, nothing to interfere with front
or side opening windshields, only clean lines and nothing to
interfere with an enclosure. Strong enough to support hundreds
of pounds of gear, and shrug off the beating a boat takes running
offshore, yet very light weight overall. In fact a Custom Fishing
Hardtop weighs less than 100 pounds for most applications.
Each Custom
Fishing Hardtop is made from high strength corrosion resistant
aluminum alloys. The aluminum is spiral finished with a fine
320 abrasive, before it is given a chemical cleaning process
called "bright dip" which gives it the appearance of
brushed chrome, or brushed stainless. After bright dip, it is
clear anodized, which is the build up of a hard clear oxide finish
for maximin salt water protection. The perimeter hardtop frame
is shaped using our proprietary ATL-6 aluminum extrusion. This
extrusion provides a self-trimming recess for the hand laid fiberglass
top surface, allowing it to be securely fitted to the all welded
structural frame with no exposed fasteners. Using our proprietary
database, each Atlantic Towers Custom Fishing Hardtop is custom
designed and fabricated to order for your individual boat. The
leading edge of the Custom Fishing Hardtop is shaped to conform
to the shape of the windshield on your boat, for a factory installed
look, and easy fit of a wrinkle free enclosure. The arch style
legs are stylish, strong, and make for easy installation. The
pipe used to fabricate the legs is 1 1/2" schedule 40 marine
grade aluminum pipe, which measures 1.90" on the outside
with a very heavy wall thickness.
By mounting
on the cabin sides, Atlantic Towers unique mounting fittings
help to isolate vibration from the gel coated fiberglass surface.
This mounting position keeps the fittings high and out of the
way of a person going to the bow on the side decks (they extend
outward less than a typical antenna mount). It is also extremely
strong, even though the fiberglass is not very thick in this
area as the primary loads are in the fore and aft direction,
the very direction in which the fiberglass cabin side is strongest.
The mounts consist of a male pin in the arch, and a female fitting
which is bolted to the boat with a supplied matching back up
plate.
Base
Price: $2880*
* Full width
or expanded area top (most walk-around style boats with recessed
side decks are at standard pricing, tops for traditional express
style boats, larger runabouts, and extra wide walk-arounds require
a top of more than 30 square feet at additional cost) $400.00
| Options |
| • |
Pair
of 12 volt 55 watt rectangular Halogen Spreader Lights by Hella |
$99.00 |
| • |
Pair of
12 volt 100 watt Oval Halogen Spreader Lights by Hella
|
$169.00 |
| • |
12 volt
combination Anchor/Running Light on matching aluminum mast
|
$119.00 |
| • |
Additional
Rod Holders, welded anywhere on top, choice of gold or clear
anodizing (gold is standard) each
|
$65.00
ea. |
| • |
Adjust-O-Launcher”
Rod Holders, each
|
$89.00 ea. |
| • |
Extra reinforced
mounts in top for antennas, Searchlights, and other equipment,
ea.
|
$60.00 |
| • |
Overhead
supports for electronics enclosure
|
$90.00 |
| • |
Adjustable
forward support struts |
$150.00 |
| • |
Lifting
eye (on rear leg for block & tackle)
|
$75.00 |
| • |
Center
Rigger bracket
|
$125.00 |
| • |
Breakdown
legs and Packing for common carrier shipment |
|
Terms
and Conditions
Pricing does
not include shipping or installation . Pricing is FOB Barnegat,
NJ 08005. Delivery can be arranged by private hauler in the northeastern
US, and common carrier in other areas. International shipping
is available . All balances must be paid prior to shipment. Deposits
paid against custom made products are not refundable. Orders
for custom made products cannot be cancelled once shop work orders
have been issued. Parties agree that any disputes arising from
this agreement will be submitted to arbitration under the Better
Business Bureau.
Prices
and specifications are subject to change |
Custom
built for most boats to 8’6” beam. The Custom Fishing
Arch is a fully fabricated one piece all welded structure using nearly
2" O.D. schedule 40 pipe. Each
Custom Fishing Arch is unique to the specific Make and Model boat
for which it is designed using our proprietary data base of specifications
for over 1000 power boats. The angle, taper, side spacers and beam
dimensions are all customized for individual boat models and owner
preference. The Custom Fishing Arch is designed to mount to the side
of the cabin with back-up plates on express style and walk-around
boats. It will fit over and around your existing canvas top without
interference. All Atlantic Towers Custom Fishing Arches include;
