Proprietary telescoping design allows adjustment to fit larger express style and flybridge boats to 40'+
High Strength welded frame of schedule 40 marine grade aluminum pipe nearly 2" in diameter, with secondary reinforcement of nearly 1 3/8" in diameter finished in durable salt resistant bright clear anodizing.
The Standard Radar Arch is designed to fit around existing canvas bimini and navy style tops. It will not interfere with most side curtains, windshield covers or cockpit covers.
The Standard Radar Arch has the appearance and strength of a custom welded unit when installed on your boat. It weighs less than 100 pounds, and is strong enough to support the weight of two persons for the installation of equipment.
The Radar Arch is designed to fit around existing canvas bimini and navy style tops. It will not interfere with most side curtains, windshield covers or cockpit covers.
The Radar Arch has the appearance and strength of a custom welded unit when installed on your boat
Every Standard Radar Arch includes a large (approximately 12” x 12”) radar plate, plus four 4” wide mounting plates which will accommodate up to six additional antennas. Radar cables, antenna cables and other wiring may be concealed inside the frame The Standard Radar Arch is mounted to your boat in four locations with our proprietary “Pin & Pad” mounting hardware. These fittings have nylon bushings which help isolate any vibration in the Standard Radar Arch from the fiberglass surface of your boat. The “Pin & Pad” fittings also allow easy dismounting of the arch (just remove the four 3/8” bolts) should you wish to store your boat in a building with a low door, etc. Click Here for further details.
Everything is included for a complete installation on most boats, even backing plates along with instructions and a video detailing all the steps of the installation.
New for Spring 2015, "Tower In A Box" arch bridges include a snap-in Sintra cover panel in radar plate to conceal wiring. A feature borrowed from our Custom Structures.
KIT02000 & KIT02200 Hinge System, our most popular option, allows the Standard Radar Arch to be folded for increased clearance, normally installed to allow the arch to fold aft into the cockpit area. The Hinge System replaces the standard “Pin & Pad” mounting hardware, with hinge hardware and fairing pads for the aft leg and a custom slotted fitting for the forward leg, allowing the insertion of a quick release pin (also supplied) to allow the arch to be released and folded without the need for tools. $229 ($369 if purchased separately)
AJ30500 Need more rod holders? Individual Adjust-O-Launcher aluminum rod holders can be mounted anywhere on the perimeter of the Standard Radar Arch framework. A unique patented design available exclusively from Atlantic Towers, manufactured from all aluminum in natural aluminum anodized finish Adjust-O-Launchers can be pivoted thru 12 positions for unmatched flexibility. $99 each / 4 or more $89 each Gold Anodized finish available for special order. Please call 732-237-8800
AJ31000C Adjust-O-Net Holder
Utilizing our same unique patented Adjust-O-Launcher system, the Adjust-O-Net Holder can be placed anywhere on your structure. The Clamp Assembly is anodized to the same hardness as your structure and may be installed and removed without marring the finish of the structure. You can try as many positions as you wish. Available in clear natural aluminum. Sold Individually for $99.
55 Watt Deck Lamps Option
55 watt conventional halogen deck flood lamp with replaceable bulb in waterproof housing. Current draw, 4.8 amps each, 9.6 amps a pair at 12 volts. Wire with minimum 14 gauge (always used tinned stranded wire for marine applications). Includes choice of mounting bracket to fit any Atlantic Towers structure. Sold in Pairs
Tower in a Box Arches - Pair MP15000 with KIT54000 Light Mount: $149
Custom Arches - Pair MP15000 with KIT54000 Light Mount: $149
Anchor/Running Light, a two way navigation lamp installed on an anodized aluminum mast with anodized finish to match the Standard Radar Arch. Functions as all round light with both sides illuminated, or forward steaming light with just forward half illuminated. Custom fitted shoe allows easy bolt-on installation on centerline of The Standard Radar Arch. 5” height or 18” height. $169
5" Anchor Running Light with LED Head
5" Anchor Running Light with Perko 2 Way Head
18" Anchor Running Light with LED Head
18" Anchor Running Light with Perko 2 Way Head
Will the Standard Radar Arch fit my boat?
The Standard Radar Arch is designed to fit a wide variety of boats both Flybridge and Express configurations. It can even be gunnel mounted on center console boats. The Standard Radar Arch adjusts through a beam width mounting range of 85” out to a maximum of 123” The overall height can be adjusted by trimming the legs before installing the base fittings. The accompanying drawings show the full range of adjustment of the Standard Radar Arch , as well as the recommended mounting configuration on express and flybridge boats
Can I install the Radar Arch myself?
The Standard Radar Arch was designed for owner installation and is typically no more complicated than installing rod holders or outriggers, just a few more pieces. If you are comfortable with hand tools, the Standard Radar Arch comes with instructions and all the backing plates and hardware required for a thru bolted installation. (Don’t want to install the Radar Arch yourself? Check our “Services” page for professional installers with whom our customers have had a good experience)
How is the Radar Arch shipped to me? Although the Standard Radar Arch is not heavy it is too large to go by UPS. We have discounted freight arrangements with several trucking companies, which cover all 48 states and Canada. We can also ship to Alaska, Hawaii and any overseas city, call us for details. The Standard Radar Arch is packed in a single large cardboard carton and normally ships to a commercial address (like your business or marina) east of the Mississippi for $125 or less. West of the Mississippi shipping is normally $200 or less. Residential delivery is additional (call for details) (New Jersey shipping addresses or pick ups at our warehouse must pay 6% sales tax)
What happens if my Radar Arch is damaged in shipping?
Atlantic Towers wants you to enjoy your boat, not spend the season chasing a freight claim. If your Radar Arch arrives damaged, just refuse the shipment and we will send you a new one at no additional cost to you.
Can I return my Radar Arch if I decide I don’t want to keep it?
Atlantic will accept the return of any Standard Structure within 30 days of it’s receipt by you. Simply return the Structure in the original packaging in new condition freight pre-paid and we will refund the purchase price less a 10% restocking fee
Is my Radar Arch guaranteed?
Yes, for 5 years, see the warranty section of our website for details.
How do I get my Radar Arch? You can purchase a Radar Arch directly from Atlantic Towers or our authorized reseller partners around the world.
**NOTE: There is a 10% re-stocking charge for cancelled or returned merchandise**
Due to our dedication to continued product improvement, we reserve the right to make changes without notice.